Fiber-to-the-home or (FTTH) is a transmission technique of optical fiber communication. it is also connected with optical fiber directly to the user’s home or where it is needed. This type of optical fiber communication is different as compared to TTN FTTC, or HFC. They use conventional metallic wires that are twisted pair and coaxial cable.
What is Fiber Optic Cable?
- The fiber optic cable is used for transmitting data through fibers or plastic. it is glass packing that is in threads and transmits modulated messages over light waves.
- Optica fiber provides higher bandwidth transmission than other methods and has harmful effect than metallic cables. its best benefit is easy installation
- The fiber optic cable is made through the use of glass or plastic, which transmits light from one point of fiber to another end.
- Glass fiber cables use light signals for data transmission as compared to electrical signals.
- Twisted pair cables use current for transferring data signals.
- There are two types of optic fiber cable used single-mode fiber optic cable and multimode optical fiber.
Advantages of FTTH
- It is a passive network that is used from the office to the user’s end. It has high bandwidth and longer distance covered in line with large-scale applications mode of operators
- Data is transmitted over optical fiber so less issue occurs.
- It has high bandwidth so it has a flexible protocol
- The use of point-to-point technology FTTH performed well
- Optcia family comes with FTTB, FTTC, FTTSA etc
- The connection of optical fiber directly with users’ homes comes with no restrictions for bandwidth wavelengths and transmission technology. It is best to use it for different services. It is best for a transparent service network and the best method to access network development.
- The degradation of technology cost of fiber to the home is less and about equal to DSL and HFC networks that make easy configuration of FTTH.
- FTTH technology is also used for solving last-mile issues in information superhighway.
- The combination of FTTH and ethernet is higher than ADSL and ISDN.
Disadvantages of FTTH
- Based on the MAC speed limit mode, delay time increases for full broadband.
- The speed of FTTH can be about 4M uplink and 100M downlink which is unequal. For up and down lines of FTTb is equal and provides10M.
- Most telecom companies are ADSL-based development of broadband access, so ADSL is broadband access technology based on copper wire. Copper is used on a global level. With the increase in the cost of copper cables, the line cost of ADSL is higher. The raw material of optical fiber is silica which is inexhaustible.
- The main disadvantage of FTTh broadband is installation cost and Fiber optics cable is costly to connect, which can result in high bills. With that, not all areas have easy access to FTTH.
What are the benefits of FTTH connection?
- FTTH network after installation provides different benefits such as high-speed downloading, and uploading and strong connection and features to support different devices at same time
Is FTTH better than cable?
- Fiber internet is the best option for cable and not only faster as compared to cable internet but fiber is reliable and has low latency
Is FTTH better than WIFI?
- Fiber optic speed is higher than a wireless network
What is the difference between fiber and FTTH?
- Optical fiber is technology, single mode and multi-mode fiber are different types of optical fiber used for certain features. FTTh is a certain technique of optical fiber connection for providing high-speed internet to users
What is the speed of FTTH?
- FTTH provides a speed of about 100MBps this speed is 20 to 100 times higher than cable modem or DSL connections.
What are the 4 types of network cables?
- Coaxial Cables.
- Shielded Twisted Pair Cables.
- Unshielded Twisted Pair Cables.
- Fibre Optic Cables.
What are the 5 types of cable?
- Bare cables and bare conductors,
- Wire and Cable
- Overhead Insulated Cable
- Control Cable
- Special cable.
What is the difference between FTTH and FTTP?
- FTTP and FTTh are the same processes involved in broadband technologies. They both provide internet connection through the use of fiber optics cable over the network
Is FTTH faster than copper?
- As copper is best for voice signals, but has limited bandwidth, and fiber provides about 10Gbps or higher. Fiber has features to provdie more than 1000 times more bandwidth than copper and can move more than 100 timesÂ
Is 5G faster than FTTH?
- 5G network comes with a slower response as compared to fiber since high-frequency wave are used. Fiber network comes with high-speed times since they use wire, and best for applications that need fast response times.
What is the future of FTTH?
- The market size of FTTH was about 47 billion dollars in 202 and now it is projected to increase compound annual growth rate (CAGR) of 12% from 2023 to 2030.
Does FTTH need a modem?
- There is no need for a mode for fiber optic internet, then it uses ONT. The model used for cable or DSL that used in the past. The modem uses coaxial cables for transmitting but needs current to on and get a connection.
What are the features of FTTH?
- FTTH provides high-speed internet and larger bandwidth,
- it can stream high-quality content and have a larger number of devices connected at the same time. With that users can get internet and TV services through broadband connections.
What are the different types of FTTH?
- Â centralized split
- distributed split
- star architecture
- daisy-chaining
What is XLPE cable?
- XLPE cable or Cross-linked polyethylene is an electrical cable used for power transmission and distribution.
Read also: