Hello, readers welcome to the new post. Today we will learn Introduction to 3D Printing. 3D printing also called additive manufacturing that helps to make three-dimensional objects through the use of CAD models or digital 3D models. It is performed through the use of different processes the deposition of material, and connection solidification through computer control.…
Details
Hello, readers welcome to the new post. Today we will discuss Introduction to Copper Core PCB. The Metal core PCB board is also called a thermal board or metal-backed board. it is a type of PCB that uses metallic material at the base to spread the heat of the board. Thick metals like aluminum or…
Details
Hello, readers welcome to the new post. In this post, we will learn the Difference between RASPBERRY PI PICO and ESP32 C3. Currently, there are two best microcontrollers that are used for project creation. Micriconrolers are Integrated circuits that are programmed to perform different operations. The Raspberry Pi Pico and ESP32 are the main types of…
Details
Hi, guys welcome to the new lesson. In this post, we will discuss How to Generate Gerber files from Eagle. Normally it is not general to use make PCB board through use of Eagle files, because it will be good to send the Gerber files direct to the PCB manufacturing company. Here we will see…
Details
Hello, readers welcome to the new post. Today we will learn Introduction to SPDT Relay. A relay is a type of electronic switch. It consists of control signals and input signals like other circuits. The control also has electric circuitry with a coil wounded about the soft iron core that controls it. Switch get the input…
Details
Hello, readers welcome to new post. In this post, we will learn What is the difference between $, $$, and $x. In computer programming, $, $$, and $x are called variables and used for storing the data. The basic difference between them is that $ is a scalar variable, $$ array variable and $x is…
Details
Hello, readers welcome to the new post. In this lesson, we will learn What is Reciprocity Theorem. Reciprocity in the electrical system is a feature of circuitry that makes the relationship between volts and current at two points of the circuit. This thereon explains that the current at one point of the circuit due to…
Details
Hello, readers welcome to the new post. Today we will discuss HOW TO HACK HEADPHONE JACK. The headphone jack is also known as an audio jack, jack plug, or phone jack which is a small round phone connector normally used for analog audio signals. It is pin structured structure plug that comes with standard pair of…
Details
Hello, readers welcome to new post. Today we will discuss Difference between %d and %i format specifiers in C language. In C language of programming %d and %i are called formate specifiers. %d was used to specify the variable type as decimal and %i used for integer specification. Note: %d is used to specify signed decimal…
Details
Hello, readers welcome to the new post. Today we will discuss Difference between LM741 and LM358. The operational amplifier is an electrical device that has two input and one output pins. Its inputs are inverting and non-inverting according to positive and negative polarity. There are different types of operational amplifiers common application of this circuit are…
Details