Hello, readers welcome to the new post. Here we will discuss DC Motor Control in Proteus using IC L293D. DC motor is a device that operates on the dc supply and converts the electrical energy to mechanical energy. In this post, we will make a circuit to control the dc motor in Proteus and use IC L293D for this purpose to make the project.
So let get started
DC Motor Control in Proteus using IC L293D
- In below figure you can see the components used in this projects
- In below figure you can see the circuit created through the use of all components used
- In the above figure, the circuit is designed through use of components and there are two switches exists that are used to operate the motors
- If one switch is on and the other is off motor will run and second is on and first one is off then again motor operates
- So you can see that there is the main component is L293 D that is used to regulate the motor.
Features of IC L293
- The main features of IC L93 are discussed here with details
- It comes with sixteen pinout and dual-inline packaging
- It also has automatic thermal shutdown
- Its transition time is three hundred nanosecond
- Input volts value is 4.5 volts to seven
- The continuous current value is six hundred milliamps
- It comes with a feature to operate two dc motors
That is all about the DC Motor Control in Proteus using IC L293D. I have explained the details of this aspect through making circuit and control of the motor is done through IC that is considered as main component of project Thanks for reading have a nice day