Hello, readers welcome to a new post. In this tutorial, we will learn Virtual Terminal in Proteus Simulation. Proteus software is used to simulate different projects that are going to be practical. It comes with different features that are used to make various projects. Here we will discuss the virtual terminal that is used proteus…
Details
Hello, readers welcome to the new post. Here we will discuss Introduction to LF353N Op-Amp. The LM353N is designed as an input amplifier for low-noise, low-current, and fast-switching audio applications commonly used in dual-supply operation. It features a highly stable, programmable output stage, low noise, and is based on the latest CMOS technology. So let’s…
Details
Hello, readers welcome to the new post. In this tutorial, we will discuss Construction of Double Sided PCB. The double-sided board is made with two copper layers at the upper and lower sides. The copper pads and copper traces exist on board sides and two copper layers are configured with plated through holes. These boards…
Details
Hello, readers welcome to new post. Here we will discuss about What is Fuse. Fuse is a very commonly employed protective instrument in the electrical system. In commonly used in systems operating at low voltage levels. It is also used for a circuit that uses medium-level volts and for distribution lines of eleven kilovolts that use…
Details
Hello, readers welcome to the new post. In this post, we will learn the introduction to TL084CN Quad Op-Amp. It is JFET configured at input operational amplifier has a large value of impedance at the input and less value of offset current and voltage. Its configuration is like the TL074 with the difference that has a…
Details
Hello, readers welcome to the new post. Here we will learn Introduction to TDA2030. This module is considered a monolithic IC that comes with a petawatt power configuration employed for less power usage applications. Normally its output is about fourteen watts. It gives a large value of output current and has less value of harmonic and…
Details
Hello, readers welcome to the new post. Here we will discuss DC Motor Control in Proteus using IC L293D. DC motor is a device that operates on the DC supply and converts the electrical energy to mechanical energy. In this post, we will make a circuit to control the DC motor in Proteus and use…
Details
Hello, learners welcome to new tutorial. In this post, we will learn PCB Design in Proteus. PCB is considered as the very basic part of any project since all parts of the project are positioned on the board. It is very necessary all parts are configured on the boards very accurately and fully. If not done…
DetailsHello, guys welcome to new post. Here we will discuss How to Increase Work Area in Proteus. Proteus is electronic-based software used to make different types of projects that we generally make. It is a very helpful tool that helps us to design any projects and simulate them according to our requirements. Before making a project…
Details
Hello, readers welcome to new tutorial. In this post, we will learn PCB Assembly with Automated Machines. PCB construction for different projects needed a very accurate and good process to make each and every connection very fine configuration. Since different components such as SMD are difficult to position on the board. Different components of small configurations…
Details